| Sign In | Join Free | My himfr.com |
|
High quality cable manufacturer！ 5G communication cable | EV Cable
2 Years
| Ask Lasest Price | |
| Brand Name : | ITI-LINK |
| Model Number : | ITI-CABLE-003 |
| Certification : | UL, ETL, CSA, RCM, TUV, CPR, CE, RoHS |
| Price : | $50-100/PCS |
| Payment Terms : | T/T |
| Supply Ability : | 2000pcs/day |
| Delivery Time : | 15-45Days |
Cat5e UTP CMR Cable 24AWG Solid Pure copper Extend To 350MHz 1000FT
Description:
1. This CMR flame-retardant Category 5e Ethernet cable provides 100MHz bandwidth within a distance of 90 meters. The typical application speed is 100Mbps.
2. This Category 5e flame-retardant Ethernet cable is suitable for vertical trunk wiring in buildings and other scenarios, and can undertake the task of transmitting communication signals between floors.
3. This Category 5e product uses high-quality oxygen free copper as the transmission conductor and uses 4 pairs of 8-core twisted pair wires. The conductor size meets the standard requirements and can provide reliable and stable transmission performance.
4. Due to its excellent fire resistance and suitability for vertical wiring, CMR cables are widely used in vertical mainline subsystems within buildings, such as elevator shafts and vertical wiring channels between floors. They are commonly used for network cabling systems in large buildings such as office buildings, shopping malls, and hotels to ensure stable and secure network communication between floors.
| Product Description | |
❶ Inner Conductor | Composition : Solid Bare Copper (BC) |
| Diameter : See table below | |
| ❷Insulation | Composition : High density Polyethylene (HDPE) |
| Diameter : See table below | |
| ❸Filler | Type of filler : Ripcord |
| Composition : Polyester | |
❹Jacket | Composition : PVC, Rated 60 or 75℃ |
| Dimensions : See table below | |
| color : according to the the customer's requirements | |
Specifications:
| Product Description: Cat 5e U/UTP 4 X 2 X 24AWG (CMR) | ||||||
| Rev.: A | ECN Description: | |||||
| Construction Item Description | Electrical Property | |||||
Conductor | Material | Bare Solid Copper(elongation: 19 ~ 24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m | ||
| OD | 24 AWG | Resistance unbalance within a pair | ≤ 2% | |||
Insulation | Material | HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V | >1500 MΩ / 100m | ||
| OD | 0.90 ± 0.01 mm | Mutual capacitance | 5600 pF / 100m MAX | |||
| Average THK | 0.20 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |||
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ± 15 Ω | |||
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min | No breakdown | ||||
| 3p: white + 2 green stripes & green | Mechanical Property | |||||
| 4p: white + 2 brown stripes & brown | insulation | elongation before aging | ≥ 300% | |||
Pair Twist | Lay & Direction | 1p: S=20.0 mm (28%) | tensile strength before aging | ≥12 MPa | ||
| 2p: S=17.5 mm (24%)) | elongation after aging | ≥ 150 % | ||||
| 3p: S=22.0 mm (32%) | tensile strength after aging | ≥10.5 MPa | ||||
| 4p: S=15.5 mm (21%) | jacket | elongation before aging | ≥ 150 % | |||
| OD | / | tensile strength before aging | ≥ 13.5 MPa | |||
Inner Assemble | Lay | S=90 ± 5 mm | elongation after aging | ≥ 125 % | ||
| Direction | according to the drawing | tensile strength after aging | ≥ 12.5 MPa | |||
| Filler | / | Packing | ||||
| OD | / | Inner Box | NA | |||
| Filler | Material | Ripcord | Master Carton | NA | ||
| Construction | 300D | |||||
Outside Shield | Shield | / | ||||
| Construction | / | |||||
| Material | / | |||||
| Coverage | / | |||||
Jacket | Material | PVC, Rated 60 or 75℃ | ||||
| Hardness | 81 ± 3 | |||||
| OD | 5.0 ± 0.2 | |||||
| Average THK | 0.45 ~ 0.55 | |||||
Color | according to the customer's requirements | |||||
Marking Color | according to the customer's requirements | |||||
| Marking | according to the customer's requirements | |||||
| Electrical Properties | ||
| Conductor Resistance at 20°C | UL 444 & CSA C22.2 No. 214 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | ≤ 2% | |
Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage (cd/screen): 1.00KV DC or 0.7 KV AC for 1 min | No breakdown | |
| Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V | >1500 MΩ / 100m | |
| Mutual capacitance | 5600pF / 100m MAX | |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |
| Characteristic impedance at 100MHz | 100 ± 15 Ω | |
| Spark Test | 2000 ± 250VOC | |
| Transmission Properties | |||||||||
| CAT5e CMR UTP CABLE | |||||||||
No. | Frequency | Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) | Return Loss (Min) | NEXT (Min) | PS NEXT (Min) | EL-FEXT (Min) | PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | |
| 1 | 4 | 4.05 | 552 | 45 | 23.01 | 56.27 | 53.27 | 51.96 | 48.96 |
| 2 | 8 | 5.77 | 546.73 | 45 | 24.52 | 51.75 | 48.75 | 45.94 | 42.94 |
| 3 | 10 | 6.47 | 545.38 | 45 | 25 | 50.3 | 47.3 | 44 | 41 |
| 4 | 16 | 8.25 | 543 | 45 | 25 | 47.24 | 44.24 | 39.92 | 36.92 |
| 5 | 20 | 9.27 | 542.05 | 45 | 25 | 45.78 | 42.78 | 37.98 | 34.98 |
| 6 | 25 | 10.42 | 541.2 | 45 | 24.32 | 44.33 | 41.33 | 36.04 | 33.04 |
| 7 | 31.25 | 11.72 | 540.44 | 45 | 23.64 | 42.88 | 39.88 | 34.1 | 31.1 |
| 8 | 50 | 15.07 | 539.09 | 45 | 22.21 | 39.82 | 36.82 | 30.02 | 27.02 |
| 9 | 62.5 | 16.99 | 538.55 | 45 | 21.54 | 38.36 | 35.36 | 28.08 | 25.08 |
| 10 | 100 | 21.98 | 537.6 | 45 | 20.11 | 35.3 | 32.3 | 24 | 21 |
| 11 | |||||||||
| 12 | |||||||||
| 13 | |||||||||
| 14 | |||||||||
| Remarks: ＊ are the reference values | |||||||||
Notices:
1. After unpacking, please carefully inspect the product and handle
it with care.
2. During the construction period, it is necessary to follow the
wiring specifications and avoid bundling and excessive bending of
network cables.
3. When making RJ45 network cable connectors, please follow the
T568B or T568A standard to ensure that the wiring sequence is
correct to prevent line faults or network instability.
4. To ensure optimal transmission performance, it is recommended to
use a single Ethernet cable with a length not exceeding 100 meters.
Applications:
CMR flame-retardant rated Cat5e Lan Cable have been widely used in various network cabling scenarios due to their excellent flame-retardant performance and stable transmission capability. This network cable uses 4 pairs of 24 AWG high-quality oxygen free copper transmission wires, covered with a highly flame-retardant PVC protective sleeve on the outside. It not only effectively prevents fires and ensures the safety of data centers and personnel, but also prevents moisture from entering in harsh outdoor environments, maintaining the stability of data transmission. CMR level Category 5e Ethernet cables support transmission rates of up to 100 MHz and transmission distances of up to 90 meters, fully meeting the application requirements of high-performance Ethernet. Whether in outdoor overhead, pipeline laying, or indoor vertical trunk subsystems, CMR flame-retardant Category 5e network cables can provide excellent network connectivity, ensuring efficient and secure data transmission.
FAQ
UL/CE/RoHS/ETL/CPR Certificate Lan cable Cat5e U/UTP 24AWG Extend To 350MHz CMR PVC Bare Solid Copper
Q1. Can I order samples of Lan cables?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Our factory takes 3-5 days to complete the sampling process, while mass production takes 15-45 days to complete.
Q3. Do you have a minimum order quantity limit for network cable orders?
A: The order quantity generally starts at 1000PCS, and the starting quantity varies for different products, but the total quantity needs to exceed 1000PCS.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to arrive.
Q5. How to proceed an order for network cable?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 10 years warranty to our products.
Q8: How to deal with the faulty?
Our products undergo strict testing upon leaving the factory to ensure 100% compliance.
If there are any problems during transportation or other reasons causing product issues, we will also do our best to help customers solve them.
|
|
